Subscribe to download
VR Class Boost Car

This is an extra Boost car intended for long heavy trains in Scrap Mechanic.
Any and all VR Class vehicles are intended for Physics 1, and 7 Gauge tracks.

[INSTRUCTIONS FOR BOOSTER USAGE]

There are 3 booster units, each containing a forward and backward boost.
Both sides of the car have switches to enable them.

If the Light green lamp is enabled in an unit, the forwards boost of that unit is primed and ready.
If the Light red lamp is enabled in an unit, the backwards boost of that unit is primed and ready.

The dark red light on top of an unit indicates that the unit is not enabled for usage.
The yellow light on top of an unit indicates that the unit is primed and ready.
The dark green light on top of an unit indicates that the unit is currently operating and moving.

The boost is turned on by the signal coming from the engine/other cars connected to it. Follow the instructions below to know how to connect the cars to each other.

[INSTRUCTIONS FOR CAR CONNECTION]

To connect between cars, weld the non bearing end to the bearing end, and connect from the Lighter Colors to the darker colors to have a connection between the cars for thrusters.
Light Red -> Dark Red
Light Green -> Dark Green

Do not connect the middle connections, those are to keep only one engine as the master engine during operation.

[SUGGESTED USAGE]

This it is suggested to place this in intervals of 2-3 cars depending on how heavy it is, and to enable the forward and backwards boost of one unit.

At the end of the train, only the forward boost of one unit should be enabled for stable behavior.